Boler – Jalousie Window Operator – Fits BOTH dinette windows

Our door lock kit is designed to replace the original “L” shaped utility door locks found on many vintage trailers including 1968-1974 boler and most models of Scamp trailers.
Using common tools the average DIY’er can replace their door lock with a modern Bauer lockset with deadbolt.

This kit comes with a selection of spacers to achieve the required door thickness of between 1⅛” to 1⅜” thick.  NOTE: the lock will not work on doors thicker than 1½”

Our complete kit includes:

1 – Chrome Bauer Door lock, packaged
1 – Inner Aluminum Adapter Plate
1 – Outer Aluminum Adapter Plate 
1 – Adapter Trim Plate
1 – ⅛” Lock Spacer Plate
1 – ¼” Lock Spacer Plate
1 – Aluminum Striker Plate
2 – #8-32x½” Pan Head Machine Screws
4 – #8-32x¾” Pan Head Machine Screws
4 – #8-32×1” Pan Head Machine Screws
2 – #10-24x¾” Flat Head Machine Screws
2 – #10 Flat Washers
2 – #10-24 Nuts
4 – ⅛” Aluminum Rivets
2 – 3/16″ large head rivets
1 roll – Butyl Sealing Tape

Upgrade your door lock today at an incredibly low price

NOTE: This door lock replacement kit was specifically designed to replace the door lock on 1968-1974 boler & Scamp trailers.
If you plan on installing this lock on any other trailer than a boler please Contact Me.  This lock kit will not fit fibreglass trailers that have a moulded profile around the door lock like Trillium and Burro.  The area around the door lock must be flat and smooth on both the inside and outside with a door thickness no more than 1½”.

NOTE: I hand build the adapter plates for each lock kit order, I try to keep inventory on hand but if I run out of adapter plates your order can take several days to assemble.  If there is any delay with your order I will send you an email with expected shipping date

Due to the global supply shortage of dust mask and disposable gloves, we will not be including them in our kits until further notice
No returns or refunds, see Terms & Conditions

Our door lock kit is designed to replace the discontinued Bargman L400 and Lyster 20-213 / 20-214 door locks found on boler trailers although it may also fit many other vintage trailers

Using common tools the average DIY’er can replace their door lock with a modern Bauer lockset with deadbolt.

Our complete kit includes:

1 – Chrome Bauer Door lock, packaged
1 – Inner Aluminum Adapter Plate (NEW – White factory coated aluminum)
1 – Outer Aluminum Adapter Plate (NEW – White factory coated aluminum)
1 – Aluminum Striker Plate
2 – #8-32x½” Pan Head Machine Screws
4 – #8-32x¾” Pan Head Machine Screws
4 – #8-32×1” Pan Head Machine Screws
2 – #10-24x¾” Flat Head Machine Screws
2 – #10 Flat Washers
2 – #10-24 Nuts
6 – ⅛” Aluminum Rivets
1 roll – Butyl Sealing Tape

Upgrade your door lock today at an incredibly low price

NOTE: This door lock replacement kit was specifically designed to replace the Bargman L400 door lock on 1975-1988 boler.
If you plan on installing this lock on any other trailer than a boler please Contact Me.  This lock kit will NOT fit fibreglass trailers that have a moulded profile around the door lock like Trillium, Surfside and Burro.  The area around the door lock must be flat and smooth on both the inside and outside with a door thickness no more than 1½”.

 NOTE: I hand build the adapter plates for each lock kit order, I try to keep inventory on hand but if I run out of adapter plates your order can take several days to assemble.  If there is any delay with your order I will send you an email with expected shipping date

Due to the global supply shortage of dust mask and disposable gloves, we will not be including them in our kits until further notice.
No return or refund, see Terms & Conditions