Home » Shop » Hardware » Boler Door Lock Replacement Kit – Fits 1968-1974 Boler & most Scamp

Boler Door Lock Replacement Kit – Fits 1968-1974 Boler & most Scamp

$165.00

Our door lock kit is designed to replace the original “L” shaped utility door locks found on many vintage trailers including 1968-1974 boler and most models of Scamp trailers.
Using common tools the average DIY’er can replace their door lock with a modern Bauer lockset with deadbolt.

This kit comes with a selection of spacers to achieve the required door thickness of between 1⅛” to 1⅜” thick.  NOTE: the lock will not work on doors thicker than 1½”

Our complete kit includes:

1 – Chrome Bauer Door lock, packaged
1 – Inner Aluminum Adapter Plate
1 – Outer Aluminum Adapter Plate 
1 – Adapter Trim Plate
1 – ⅛” Lock Spacer Plate
1 – ¼” Lock Spacer Plate
1 – Aluminum Striker Plate
2 – #8-32x½” Pan Head Machine Screws
4 – #8-32x¾” Pan Head Machine Screws
4 – #8-32×1” Pan Head Machine Screws
2 – #10-24x¾” Flat Head Machine Screws
2 – #10 Flat Washers
2 – #10-24 Nuts
4 – ⅛” Aluminum Rivets
2 – 3/16″ large head rivets
1 roll – Butyl Sealing Tape

Upgrade your door lock today at an incredibly low price

NOTE: This door lock replacement kit was specifically designed to replace the door lock on 1968-1974 boler & Scamp trailers.
See description at bottom of page for more information
If you plan on installing this lock on any other trailer than a boler please Contact Me.  This lock kit will NOT fit fibreglass trailers that have a moulded profile around the door lock like Trillium and Burro.  The area around the door lock must be flat and smooth on both the inside and outside with a door thickness no more than 1½”.

NOTE: I hand build the adapter plates for each lock kit order, I try to keep inventory on hand but if I run out of adapter plates your order can take several days to assemble.  If there is any delay with your order I will send you an email with expected shipping date

Due to the global supply shortage of dust mask and disposable gloves, we will not be including them in our kits until further notice
No returns or refunds, see Terms & Conditions

In stock

SKU: DLC68 Category:

Description

NOTE: Make sure your outside door handle looks like this before ordering!

If you are unsure please contact me

This lock replacement kit is designed to replace a door lock that has an outside door handle looks like this:

Our door lock kit is designed to replace the original “L” shaped utility door locks found on many vintage trailers.
Using common tools the average DIY’er can replace their door lock with a modern Bauer lockset with deadbolt.

This kit comes with a selection of spacers to achieve the required door thickness of between 1⅛” to 1⅜” thick.  NOTE: the lock will not work on doors thicker than 1½”

Watch the overview video in the Product Video tab above and Read the Full Installation Instructions.

Upgrade your door lock today at an incredibly low price

EMAIL CONFIRMATION:  Two email confirmations will be sent when you place an order, one confirming your order has been placed and a second confirming your order has been shipped.  Please check your spam email folder if you don’t see these email in your inbox.

 

NOTE: This kit is designed to replace the locks on Boler trailers although it may also work on many other trailers with “L” handle type door locks. Many moulded fibreglass trailers have a profile moulded into the door around the door lock, the area around the lock needs to be flat for our kit to work.

This is only sold as a complete kit, individual parts are not available separately.
If you are unsure please use the contact form and we can help confirm if the kit will work on your trailer.

NOTE: All cancelled orders are subject to credit card fees

Additional information

Weight 1.5 kg
Dimensions 23 × 15 × 8 cm

Reviews

There are no reviews yet.

Be the first to review “Boler Door Lock Replacement Kit – Fits 1968-1974 Boler & most Scamp”

Your email address will not be published. Required fields are marked *